Our chemical program consulting is a specialized service that helps oil and gas operators optimize their production and reduce operational risks. Trendz consultants have extensive knowledge and experience in designing, implementing, monitoring, and troubleshooting chemical programs for various applications, such as corrosion inhibition, scale prevention, paraffin control, emulsion breaking, and more. We work closely with the operators to understand their specific needs and challenges and provide customized solutions that meet their objectives and budget. We also provide training, auditing, and technical support to ensure the effectiveness and sustainability of the chemical programs.
Our fluid sampling department has the expertise and equipment to perform various types of sampling and testing procedures. We can collect and analyze samples from all different sources. Our fluid sampling department can provide accurate and reliable results that meet the highest standards of quality and safety.
Fe/Mn Sampling
Fe/Mn Sampling is a technique used in the oil industry to measure the concentration of iron and manganese in the formation of water. Fe/Mn Sampling is important because it can indicate the corrosivity of the formation water, which can affect the integrity of the pipelines and equipment used to extract and transport the oil and gas. Fe/Mn Sampling is usually done by collecting samples of formation water from the reservoir and then analyzing them in a laboratory using atomic absorption spectroscopy. This sampling can help optimize the production and maintenance of oil and gas wells, as well as prevent environmental damage caused by corrosion.
SB4 Sampling
We are a state-certified SB4 sampling company that provides reliable and accurate sampling services for various industries. We have a team of qualified and experienced technicians who can perform SB4 sampling according to state standards and regulations. We use the latest equipment and methods to ensure the quality and safety of our results. Whether you need SB4 sampling for environmental, agricultural, or industrial purposes, we can help you with our professional and affordable services.
Ground Water Sampling
We provide services related to the collection, analysis, and interpretation of groundwater samples. Groundwater sampling is an important method for assessing the quality and quantity of water resources, as well as identifying potential sources of contamination, pollution, or degradation. Trendz employs trained technicians who use specialized equipment and techniques to obtain representative and accurate samples from various depths and locations. Trendz also offers consulting, reporting, monitoring, and remediation services to their clients, such as municipalities, oil/gas industry, environmental agencies, farmers, and homeowners. Our goal is to help protect and manage one of the most vital natural resources on Earth.
Oil Dehydration Plant Sampling
Our technicians and laboratory have the expertise and equipment to perform various sampling with analyses, such as Total Suspended Solids, Oil In Water, Soluble Iron, Total Iron, and More. These results are vital for our client's decision-making and operations. We adhere to all the recommended protocols and standards to ensure the accuracy and reliability of our data.
Geo Chem Sampling
Geo Chem Sampling is a process of collecting and analyzing soil, water, and rock samples to determine the presence and concentration of various elements and minerals. Geo Chem Sampling is essential for exploration, mining, environmental monitoring, and remediation projects. We have a team of qualified and certified professionals who can handle any project size and complexity. Trendz uses state-of-the-art equipment and techniques to ensure accurate and reliable results. We also offer competitive pricing, fast turnaround time, and excellent customer service.
Dye Sampling
Trendz is a leading company in dye sampling for flow visualization. We offer a range of dye products and services that can help you measure and analyze the fluid dynamics of your system. Whether you need to Identify flow, test the hydrodynamics of a pipe, or the thermodynamics of a heat exchanger, we have the right solution for you. Our dye sampling methods are accurate, reliable, and cost-effective. We use high-quality dyes that are compatible with different fluids and materials. We also provide expert guidance and support throughout the process, from design to data interpretation. With Trendz, you can trust that your dye sampling results will be valid and valuable for your project.
pH Sampling
We have the expertise, equipment, and experience to conduct accurate and reliable tests for various applications. Whether you need to monitor the quality of water, soil, food, cosmetics, or other products, we can help you achieve your goals and comply with the relevant standards and regulations. Trendz offers a range of services, including onsite sampling, laboratory testing, data interpretation, and reporting. We also provide consultation and training to help you improve your processes and practices. Trendz is committed to excellence, innovation, and customer satisfaction. We work with you to understand your needs and deliver solutions that meet or exceed your expectations. Contact us today to find out how we can help you with your pH sampling test.
Jar Cuts
A jar cut is a procedure that involves taking a sample of the fluid mixture from an oil well and separating it into water and oil phases. The jar cut is usually performed at the surface using a device called a separator, which applies pressure and temperature to the fluid sample. The jar cut is useful for oilfield testing because it allows the measurement of the water cut, which is the percentage of water in the fluid mixture, and the oil gravity, which is the density of the oil phase. The water cut and the oil gravity are important parameters for evaluating the productivity and profitability of an oil well.
Misc Sampling.
We offer a comprehensive range of chemical system management services, performed by our highly trained and skilled Maintenance team. Whether you need to monitor your chemical tank levels, install new or existing chemical injection systems, adjust your chemical feed rates to meet your targets, measure your flush volume with ultrasonic devices, or troubleshoot any issues with your chemical system, we have the expertise and experience to handle it.
- Chemical Tank Inventory Control (Manual Surveys/Sensors)
- Installation of Chemical Pumps and Lines
- Establishing and Maintaining Chemical Rates
- Maintenance of any Chemical System
- Fabricating Custom Chemical Systems
- Rebuilding Chemical Pumps
Trendz has over 10 years of experience in handling and delivering various types of chemicals, from flammable liquids to corrosive substances. We have the expertise and the equipment to ensure the safe and efficient delivery of your chemical products. We follow strict safety protocols and comply with all relevant regulations and standards. We have a team of trained and certified drivers, technicians, and handlers who know how to handle chemicals properly and prevent any accidents or spills. We also have a fleet of modern and well-maintained vehicles that are equipped with advanced safety features and tracking systems. Trendz offers competitive pricing and flexible delivery options. We can customize our services to meet your specific needs and budget. Whether you need regular or urgent deliveries, small or large quantities, local or long-distance transportation, we can accommodate your requests and deliver your chemicals on time and in good condition. We value customer satisfaction and loyalty. We have a friendly and responsive customer service team that is available 24/7 to answer your questions and address your concerns. We also have a quality assurance system that monitors and evaluates our performance and ensures that we meet or exceed your expectations. Our Field Service team also meets current DOT requirements and are subject to random drug testing.
Treater Truck Batch Treatments are a method of oil well stimulation that involves injecting chemicals into the wellbore to improve the flow of oil and gas. Treater Truck Batch Treatments have several advantages over other stimulation techniques, such as:
- They are cost-effective and easy to deploy, as they do not require specialized equipment or infrastructure.
- They can target specific zones or intervals in the reservoir, allowing for customized treatments that suit the well conditions and objectives.
- They can enhance the recovery of oil and gas by reducing the viscosity, improving the wettability, dissolving the paraffin, or breaking the emulsion of the hydrocarbons.
- They can also prevent or mitigate common production problems, such as scaling, corrosion, or bacterial growth, by introducing inhibitors or biocides into the wellbore.
Treater truck batch treatments are a versatile and efficient way of optimizing the performance and longevity of oil and gas wells.
We are also able to treat low- and high-pressure wells.
We offer a comprehensive Instrument repair service for Rosemount Flow and Micro Motion Devices, including Magnetic Vortex and Coriolis Flow Meters, as well as Non-Contacting and Guided Wave Radar Level Sensors, Pressure and Temperature Transmitters. Our experienced technicians can perform repairs, calibration, and installation services to ensure optimal performance and accuracy of your instrument with low downtime and minimal disruption to your operations.
Water Injection Flow Meter Maintenance is a crucial process for ensuring the optimal performance and reliability of water injection systems in oil and gas production. Water injection is used to maintain reservoir pressure, improve oil recovery, and prevent formation damage. However, water injection also poses several challenges, such as scaling, corrosion, erosion, and plugging of the flow meters. Therefore, regular maintenance of the water injection flow meters is necessary to avoid these problems and ensure accurate measurement of the water flow rate and quality.
Water Injection Flow Meter Maintenance involves several steps, such as:
- Cleaning the flow meter components, such as the sensor, the transmitter, and the piping, to remove any deposits or contaminants that may affect the flow measurement or damage the equipment.
- Calibrating the flow meter to ensure that it is within the specified accuracy and repeatability ranges. This may involve comparing the flow meter readings with a reference standard or another flow meter, and adjusting the calibration parameters if needed.
- Inspecting the flow meter for any signs of wear, corrosion, erosion, or damage, and replacing or repairing any faulty parts. This may also include checking the electrical connections, seals, gaskets, and fittings for any leaks or loose connections.
- Testing the flow meter to verify that it is functioning properly and meets the operational requirements. This may involve measuring the water flow rate, pressure, temperature, density, viscosity, salinity, and other parameters under various conditions and comparing them with the expected values.
We offer reliable, accurate, and safe methods to collect gas samples from wells and other processes so they can be analyzed for composition, quality, and performance. Our gas sampling systems are designed to meet the highest standards of quality and safety, ensuring that the samples are representative and uncontaminated. Whether you need to monitor gas flow, pressure, temperature, density, viscosity, dew point, hydrocarbon dew point, water content, or any other parameter, we have the right solution for you. Trendz can help you optimize your production, reduce costs, comply with regulations, and ensure customer satisfaction.
Steam quality sampling is a method of measuring the quality of steam produced by a boiler or other steam generator. Steam quality is defined as the ratio of the mass of dry saturated steam to the total mass of wet steam in a sample. Steam quality sampling can provide valuable information about the performance and efficiency of a steam system, as well as detect any problems or issues that may affect the quality of the steam.
Some of the benefits of steam quality sampling are:
- It can help optimize the operation and maintenance of a steam system, by identifying any factors that may reduce the steam quality, such as water carryover, contamination, corrosion, or fouling.
- Ensure compliance with regulatory standards and specifications, by verifying that the steam quality meets the requirements for the intended application or process.
- Improve safety and reliability, by preventing damage or failure of equipment or components that depend on the steam quality, such as turbines, heat exchangers, sterilizers, or autoclaves.
- Help reduce costs and environmental impact, by minimizing the energy and water losses associated with poor steam quality, as well as the emissions and waste generated by the steam system.
Trendz specializes in providing steam quality sampling services and solutions for various industries and applications. Trendz has a team of experienced technicians who can perform steam quality sampling using state-of-the-art equipment and methods. We can also provide analysis, reporting, and recommendations based on the results of the steam quality sampling. Trendz can help customers improve their steam system performance, efficiency, and safety, as well as achieve their regulatory and environmental goals.
Leak detection and repair (LDAR) is a vital service for the oil and gas industry, as it helps to prevent environmental damage, ensure regulatory compliance, and optimize production efficiency. We offer a comprehensive range of LDAR services, including:
- Skilled and certified technicians, who can safely and efficiently perform leak repairs using best practices and industry standards.
- Customized LDAR programs, that can meet the specific needs and objectives of each client, such as reducing emissions, minimizing downtime, or improving performance.
- Reliable and transparent reporting, that can provide detailed documentation of the LDAR activities, results, and recommendations, as well as support compliance with environmental regulations.
By choosing Trendz to perform LDAR, you can benefit from our expertise, innovation, and commitment to excellence. We can help you reduce your environmental impact, enhance your operational efficiency, and increase your profitability. Contact us today to find out more about our LDAR solutions and how we can help you achieve your goals.
PMAC scale testing loop
The PMAC scale testing loop is a facility that simulates the conditions of a well and facilities. It can operate at high pressure and temperature, which are essential for evaluating the performance and compatibility of different chemicals. The loop can also vary the flow rate, pH, and concentration of the chemicals to optimize the design and testing process. The PMAC scale testing loop is a valuable tool for developing and validating new solutions for system protection and efficiency.
Rotating cylinder electrode corrosion testing
Rotating cylinder electrode corrosion testing is a method to evaluate the performance of corrosion inhibitors under different flow conditions. The rotating cylinder electrode (RCE) simulates the flow regime (shear, low flow) and the mass transfer effects on the corrosion process. The RCE can be used to measure the minimum effective concentration (MEC) of the inhibitor, the partitioning coefficient between the aqueous and oil phases, the solubility of the inhibitor in water, and the protection efficiency of the inhibitor against general and localized corrosion (pitting). Competitive testing of different inhibitors can also be performed using the RCE method.
Microbiologic Testing
ATP testing is a method of microbiologic testing that measures the amount of adenosine triphosphate (ATP) in a sample. ATP is a molecule that is present in all living cells, including bacteria. By measuring the ATP level, one can estimate the bacterial load and the effectiveness of bacterial control measures. ATP testing is fast, simple and sensitive, and can be used to monitor the hygiene and sanitation of surfaces, water, food and other products.
Rotating Cage Corrosion Testing
The rotating cage corrosion testing is a method to study the influence of flow conditions on the corrosion behavior of materials. It can also be used to screen the performance of corrosion inhibitors under low temperature and low pressure conditions. The test uses corrosion coupons, which are metal samples that can be visually inspected after exposure to the corrosive environment. The test duration can be long enough to capture both general and localized corrosion phenomena, such as pitting.
Atomic Absorption Spectrometry
Atomic absorption spectrometry (AAS) is a technique that measures the concentration of elements in a sample by analyzing the amount of light that is absorbed by the atoms of those elements in a vaporized state. AAS can be used for qualitative and quantitative analysis of various elements, such as metals, non-metals, and metalloids.
Gas Chromatography/Mass Spectrometry (GC/MS)
Gas Chromatography/Mass Spectrometry (GC/MS) is a powerful analytical technique that combines two methods: gas chromatography (GC) and mass spectrometry (MS). GC separates the components of a chemical mixture based on their volatility and affinity to a stationary phase. MS identifies the molecular structure and mass of each component by ionizing and fragmenting them. GC/MS is widely used for environmental analysis because it can detect and quantify trace amounts of organic pollutants and contaminants.
We also offer: high pressure liquid chromatography, gas chromatography, auto-titration, 12’ flow loop corrosion testing, softener testing (elution studies on both SAC and WAC softeners), and resin bead analysis.